C66800 High Tensile Manganese Bronze Rods
The C66800 High Tensile Manganese Bronze Rods comes under the category of naval brass and is composed of 60% copper, 39.2% zinc and 0.8% tin. In compliance with typical naval brass the alloy possess good strength as well as rigidity. The corrosion resistance towards sea water is achieved due to the presence of zinc in place of tin. The addition of tin also makes the alloy resistant towards dezincification, fatigue, galling, and stress corrosion cracking.
Applications:
- Gears
- Sealing Rings
- Thrust Bearings
- Bushings
- Cams
- Spindles
- Bearings
- Idler Pins
- Connecting Rods
- Drive Shafts
- Valve Seats
- Sleeve Bearings
- Piston Heads
Equivelent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | C67300 |
| Europen | C67400 |
Chemical Composition:
| Cu | Al | Fe | Pb | Mn | Ni | Si | Sn | Zn | |
| Min/Max | 60.0-63.0 | .25 | .35 | .50 | 2.0-3.5 | .25 | .50-1.5 | .30 | Rem. |
| Nominals | 61.5 | – | – | – | 2.7 | – | 1.0 | – | – |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 mm and Max OD 100 mm |
| ROUND RODS | 6mm To 130 mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness and max Width 120mm |
| PROFILES / SECTIONS | AS per Customer Drawing |
| BILLETS | Up to 200mm |
| INGOTS | AS per Specification |
