C95500 Nickel Aluminum Bronze 9D Rods

C95500 Nickel Aluminum Bronze 9D is available with salt water corrosion resistance. It also is resistant to cavitation and erosion. Along with the advantage of pressure tightness, this high strength alloy is excellent for welding and is available in many forms at a lower cost to you.

Typical Uses :

  • Builders Hardware: Window Hardware
  • Consumer: Piano Keys, Musical Instruments
  • Electrical: Electrical Hardware
  • Fasteners: Stuffing Box Nuts
  • Industrial: Pickling Equipment, Valve Guides, Piston Guides, Valve Seats, Pump Fluid Ends, Glands, Worms, Worms Wheels, Hot Mill Guides, Hand Gun Recoil Mechanisms, Landing Gear Parts, Air Craft Components, Wear Plates, Welding Jaws, Landing Gear Parts, Glass Molds, Machine Parts, Sewage Treatment Applications, Valve Components, Bearings, Bushings, Valve Bodies, Gears
  • Oil & Gas: Piping for Vertical Pump Columns, Firefighting and Fire Suppression Systems, Seawater Lift Pumps, Piping Layout, Flanges and Fittings, Discharge Elbows, Cooling Loops for Power Plants, Bronze Valve Bodies, Piping Systems, Desalination Equipment, Tube Sheets, Circulating Pumps and Pump Shafts, Fasteners and Hardware for Cooling towers.
  • Marine: Marine Applications, Covers for Marine Hardware, Ship Building, Marine Hardware
  • Ordinance: Government Fittings

Chemical Composition:

Min/Max10.0-11.578.0 min3.0-


End ProductSpecification
CentrifugalASTM B271, SAE J462, J461
ContinuousASTM B505, SAE J462, J461
IngotASTM B30
PrecisionASTM B806
SandASTM B148, B763, SAE J461, J462


Joining TechniqueSuitability
Coated Metal Arc WeldingNot Recommended
Gas Shielded Arc WeldingNot Recommended
Machinability Rating40
Oxyacetylene WeldingNot Recommended

Physical Properties

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion9.0 ·10-6 per oF (68-572 F)16.2 ·10-6 per oC (20-300 C)
Density0.272 lb/in3 at 68 F7.53 gm/cm3 @ 20 C
Electrical Conductivity8 %IACS @ 68 F0.049 MegaSiemens/cm @ 20 C
Electrical Resistivity122.8 ohms-cmil/ft @ 68 F20.41 microhm-cm @ 20 C
Magnetic Permeability (As Cast)1.321.32
Magnetic Permeability (TQ50 temper)1.21.2
Melting Point – Liquidus1930 F1054 C
Melting Point – Solidus1900 F1038 C
Modulas of Elasticity in Tension16000 ksi110000 MPa
Poisson’s Ratio0.320.32
Specific Gravity7.537.53
Specific Heat Capacity0.1 Btu/lb/oF at 68 F419.0 J/kg · oK at 293 K
Thermal Conductivity24.2 Btu · ft/(hr · ft2·oF)at 68F41.9 W/m · oK at 20 C

Sizes Available:

ROUND RODS8mm To 70 mm
HEX10mm To 60mm
SQUARE10mm To 60mm
FLAT10mm Min Thickness and max Width 120mm
BILLETSUp to 200 mm
INGOTSAs per Specification

Send Enquiry

Shree Extrusions Ltd


Shree Extrusions Ltd

Hey there! How can we help you?

Send Enquiry