High Tensile Manganese Bronze Hollow Rod

The Manganese Bronze Rod C66800 comes under the category of naval brass and is composed of 60% copper, 39.2% zinc and 0.8% tin. In compliance with typical naval brass, the alloy possesses good strength as well as rigidity. The corrosion resistance towards sea water is achieved due to the presence of zinc in place of tin. The addition of tin also makes the alloy resistant towards dezincification, fatigue, galling, and stress corrosion cracking.

Applications :

  • Gears
  • Sealing Rings
  • Thrust Bearings
  • Bushings
  • Cams
  • Spindles
  • Bearings
  • Idler Pins
  • Connecting Rods
  • Drive Shafts
  • Valve Seats
  • Sleeve Bearings
  • Piston Heads

Equivelent Specifications:

SpecificationsDesignation
ISOC67300
EuropenC67400

Chemical Composition:

 CuAlFePbMnNiSiSnZn
Min/Max60.0-63.0.25.35.502.0-3.5.25.50-1.5.30Rem.
Nominals61.52.71.0

Sizes Available:

HOLLOW RODSMin Bore Size 20 mm and Max OD 100 mm
ROUND RODS6mm To 130 mm
HEX5mm To 60mm
SQUARE4mm To 60mm
FLAT5mm Min Thickness and max Width 120mm
PROFILES / SECTIONSAS per Customer Drawing
BILLETSUp to 200mm
INGOTSAS per Specification

High Tensile Manganese Bronze Hollow Rod

Send Enquiry