C3560 High Leaded Brass

C3560 high leaded brass “64%” is the brass with high machining ability. The increase in lead content will result in increased machining ability with good strength and atmospheric corrosion resistance. The increased lead content will also provide pressure tightness by sealing the shrinkage pores.

Applications :

  • Industrial : Pinions, Gears, Valve Stems, Flare Fittings, Adapters, Couplings
  • Plumbing: Plumbing Fittings, Plumbers’ Brass Goods
  • Equivalent Specifications:
Specifications Designation
BS CZ131 / CZ119
EN CW601N/CuZn35Pb2
JIS C3560
DIN 2.0331
ISO
Russian (GOST)
Chemical Composition:
Cu Pb Zn Fe
Min/Max 62 – 65 1.5 – 2.5 Rem. (Max.) 0.15 (Max.)
Specifications:
Ingots
Bar
Square
Billets
Plate
Sheet
Flat
Rods
Profiles
Wire
Hollows
Hex
Tubes
Fabrication Properties:
Joining Technique Suitability
Soldering Excellent
Brazing Good
Oxyacetylene Welding Not Recommended
Gas Shielded Arc Welding Not Recommended
Coated Metal Arc Welding Not Recommended
Spot Weld Not Recommended
Seam Weld Not Recommended
Butt Weld Fair
Capacity for Being Cold Worked Fair
Capacity for Being Hot Formed Poor
Machinability Rating 90
Mechanical Properties:
Form Temper Code Tensile Strength (ksi) YS-0.5% Ext (ksi) Elongation (%) Rockwell B Scale Section Size (in)
Rods H02 50 Min for Standard 62 Max for Standard 20 Min for Standard 15 Min for Standard 55 Min for Standard 75 Max for Standard 0.75
H02 57 Min for Standard 80 Max for Standard 25 Min for Standard 7 Min for Standard <0.50
H02 55 Min for Standard 70 Max for Standard 25 Min for Standard 10 Min for Standard 60 Min for Standard 80 Max for Standard <0.50
H01 42 Min for Standard 62 Max for Standard 15 Min for Standard 20 Min for Standard 40 Min for Standard 70 Max for Standard 1.375
H01 50 Min for Standard 62 Max for Standard 20 Min for Standard 16 Min for Standard 55 Min for Standard 75 Max for Standard 0.75
H01 50 Min for Standard 65 Max for Standard 25 Min for Standard 10 Min for Standard <0.50
O60 46 Min for Standard 16 Min for Standard 20 Min for Standard <0.50
O60 40 Min for Standard 15 Min for Standard 30 Min for Standard 45 Max for Standard 1.375
O60 44 Min for Standard 15 Min for Standard 25 Min for Standard 45 Max for Standard 0.75
Physical Properties:
Melting Point – Liquids °F 1670
Melting Point – Solidus °F 1630
Density lb/cu in. at 68 °F 0.306
Specific Gravity 8.47
Electrical Conductivity %IACS at 68°F 26
Thermal Conductivity Btu/ sq ft/ ft hr/ F at 68°F 67
Coefficient of Thermal Expansion 68-572 10?6 per °F (68 – 572°F) 11.3
Specific Heat Capacity Btu/ lb /°F at 68°F 0.09
Modulus of Elasticity in Tension ksi 15000
Modulus of Rigidity ksi 5600
Sizes Available
WIRE 1mm TO 8 mm
HOLLOW RODS Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/BARS 6mm To 130 mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS As per Customer Drawing
BILLETS Up to 200mm
INGOTS As per Specification

Inquire About the Products

Shree Extrusions Ltd

Online

Shree Extrusions Ltd

Hey there! How can we help you?

Send Enquiry