C95500 Nickel Aluminum Bronze 9D

ASTM B505
C95500 Nickel Aluminum Bronze 9D is available with salt water corrosion resistance. It also is resistant to cavitation and erosion. Along with the advantage of pressure tightness, this high strength alloy is excellent for welding and is available in many forms at a lower cost to you.

Typical Uses :

  • Builders Hardware: Window Hardware
  • Consumer: Piano Keys, Musical Instruments
  • Electrical: Electrical Hardware
  • Fasteners: Stuffing Box Nuts
  • Industrial: Pickling Equipment, Valve Guides, Piston Guides, Valve Seats, Pump Fluid Ends, Glands, Worms, Worms Wheels, Hot Mill Guides, Hand Gun Recoil Mechanisms, Landing Gear Parts, Air Craft Components, Wear Plates, Welding Jaws, Landing Gear Parts, Glass Molds, Machine Parts, Sewage Treatment Applications, Valve Components, Bearings, Bushings, Valve Bodies, Gears
  • Oil & Gas: Piping for Vertical Pump Columns, Firefighting and Fire Suppression Systems, Seawater Lift Pumps, Piping Layout, Flanges and Fittings, Discharge Elbows, Cooling Loops for Power Plants, Bronze Valve Bodies, Piping Systems, Desalination Equipment, Tube Sheets, Circulating Pumps and Pump Shafts, Fasteners and Hardware for Cooling towers.
  • Marine: Marine Applications, Covers for Marine Hardware, Ship Building, Marine Hardware
  • Ordinance: Government Fittings
Chemical Composition:
Al Cu Fe Mn Ni
Min/Max 10.0-11.5 78.0 min 3.0-5.0 3.5 3.0-5.5
Nominals 11.0000 80.0000 4.0000 4.3000
Specifications:
End Product Specification
Centrifugal ASTM B271, SAE J462, J461
Continuous ASTM B505, SAE J462, J461
Ingot ASTM B30
Precision ASTM B806
Sand ASTM B148, B763, SAE J461, J462
Fabrication
Joining Technique Suitability
Brazing Good
Coated Metal Arc Welding Not Recommended
Gas Shielded Arc Welding Not Recommended
Machinability Rating 40
Oxyacetylene Welding Not Recommended
Soldering Excellent
Physical Properties
Product Property US Customary Metric
Coefficient of Thermal Expansion 9.0 ·10-6 per oF (68-572 F) 16.2 ·10-6 per oC (20-300 C)
Density 0.272 lb/in3 at 68 F 7.53 gm/cm3 @ 20 C
Electrical Conductivity 8 %IACS @ 68 F 0.049 MegaSiemens/cm @ 20 C
Electrical Resistivity 122.8 ohms-cmil/ft @ 68 F 20.41 microhm-cm @ 20 C
Magnetic Permeability (As Cast) 1.32 1.32
Magnetic Permeability (TQ50 temper) 1.2 1.2
Melting Point – Liquidus 1930 F 1054 C
Melting Point – Solidus 1900 F 1038 C
Modulas of Elasticity in Tension 16000 ksi 110000 MPa
Poisson’s Ratio 0.32 0.32
Specific Gravity 7.53 7.53
Specific Heat Capacity 0.1 Btu/lb/oF at 68 F 419.0 J/kg · oK at 293 K
Thermal Conductivity 24.2 Btu · ft/(hr · ft2·oF)at 68F 41.9 W/m · oK at 20 C
Sizes Available:
ROUND RODS 8mm To 70 mm
HEX 10mm To 60mm
SQUARE 10mm To 60mm
FLAT 10mm Min Thickness and max Width 120mm
BILLETS Up to 200 mm
INGOTS As per Specification

Send Enquiry

Shree Extrusions Ltd

Online

Shree Extrusions Ltd

Hey there! How can we help you?

Send Enquiry